Minis

Nezuko Kiss-Cut - Cowfee Art
Nezuko Kiss-Cut - Cowfee Art
Nezuko Kiss-Cut - Cowfee Art
Nezuko Kiss-Cut - Cowfee Art
Nezuko Kiss-Cut - Cowfee Art
Nezuko Kiss-Cut - Cowfee Art
Nezuko Kiss-Cut - Cowfee Art
Nezuko Kiss-Cut - Cowfee Art

Nezuko Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Nezuko Kamada from Demon Slayer

Sticker measures approximately 4 x 5" tall & 2.5 x 6" Minis

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mythra Kiss-Cut - Cowfee Art
Mythra Kiss-Cut - Cowfee Art
Mythra Kiss-Cut - Cowfee Art
Mythra Kiss-Cut - Cowfee Art
Mythra Kiss-Cut - Cowfee Art
Mythra Kiss-Cut - Cowfee Art

Mythra Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Mythra from Xenoblade Chronicles

Sticker measures approximately

4 x 5.5" tall

4.5 x 3.5" (Peeker)

2.5 x 2 Mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Pyra Kiss-Cut - Cowfee Art
Pyra Kiss-Cut - Cowfee Art
Pyra Kiss-Cut - Cowfee Art
Pyra Kiss-Cut - Cowfee Art
Pyra Kiss-Cut - Cowfee Art
Pyra Kiss-Cut - Cowfee Art

Pyra Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Pyra from Xenoblade

Sticker measures approximately

3.5 x 5.5" tall

3.5 x 5.5" (Peeker)

3.5 x 2" Mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art
Chloe Von Einzbern // Peeker Chloe Kiss-Cut - Cowfee Art

Chloe Von Einzbern // Peeker Chloe Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Chloe Von Einzbern from Fate/kaleid liner Prisma Illya

Sticker measures approximately 5.5 x 6.5" tall, 5.5 x 4" peeker & 2.5 x 2" mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Illyasviel Von Einzbern // Peeker Illya Kiss-Cut - Cowfee Art
Illyasviel Von Einzbern // Peeker Illya Kiss-Cut - Cowfee Art
Illyasviel Von Einzbern // Peeker Illya Kiss-Cut - Cowfee Art
Illyasviel Von Einzbern // Peeker Illya Kiss-Cut - Cowfee Art
Illyasviel Von Einzbern // Peeker Illya Kiss-Cut - Cowfee Art
Illyasviel Von Einzbern // Peeker Illya Kiss-Cut - Cowfee Art

Illyasviel Von Einzbern // Peeker Illya Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Illyasviel Von Einzbern from Fate/kaleid liner Prisma Illya

Sticker measures approximately 3.5 x 4" tall, 5 x 3.5" peeker & 2.5 x 2" mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu // Mimi Kiss-Cut - Cowfee Art
Mayu // Mimi Kiss-Cut - Cowfee Art
Mayu // Mimi Kiss-Cut - Cowfee Art
Mayu // Mimi Kiss-Cut - Cowfee Art
Mayu // Mimi Kiss-Cut - Cowfee Art
Mayu // Mimi Kiss-Cut - Cowfee Art
Mayu // Mimi Kiss-Cut - Cowfee Art
Mayu // Mimi Kiss-Cut - Cowfee Art

Mayu // Mimi Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu and Mimi by Cowfee

Sticker measures approximately

3.5 x 4.5" tall (Mayu)

4.5 x 4.5" tall (Mimi)

2" tall (minis) 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu Back Kiss-Cut - Cowfee Art
Mayu Back Kiss-Cut - Cowfee Art
Mayu Back Kiss-Cut - Cowfee Art
Mayu Back Kiss-Cut - Cowfee Art
Mayu Back Kiss-Cut - Cowfee Art
Mayu Back Kiss-Cut - Cowfee Art

Mayu Back Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu and Mimi by Cowfee

Sticker measures approximately 2 x 5.5" tall, 4.5 x 5" & 2 x 2.5" tall (minis) 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art
Konosuba Nekos Kiss-Cut - Cowfee Art

Konosuba Nekos Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Megumin, Aqua, Darkness & Yunyun from KonoSuba

Sticker measures approximately 5" tall & 1.5" minis

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Raphtalia Kiss-Cut - Cowfee Art
Raphtalia Kiss-Cut - Cowfee Art
Raphtalia Kiss-Cut - Cowfee Art
Raphtalia Kiss-Cut - Cowfee Art
Raphtalia Kiss-Cut - Cowfee Art
Raphtalia Kiss-Cut - Cowfee Art

Raphtalia Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Raphtalia from Tate no Yuusha no Nariagari (The Rise Of The Shield Hero)

Sticker measures approximately

4 x 5.5" tall

4.5 x 3.5" peeker

2" wide minis

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Senko Kiss-Cut - Cowfee Art
Senko Kiss-Cut - Cowfee Art
Senko Kiss-Cut - Cowfee Art
Senko Kiss-Cut - Cowfee Art
Senko Kiss-Cut - Cowfee Art
Senko Kiss-Cut - Cowfee Art

Senko Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Senko from The helpful Fox Senko-san

Sticker measures approximately

4.5 x 5.5" tall

4.5 x 4.5" peeker

2.5 x 3"/2 x 2" mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Toga Himiko Kiss-Cut - Cowfee Art
Toga Himiko Kiss-Cut - Cowfee Art
Toga Himiko Kiss-Cut - Cowfee Art
Toga Himiko Kiss-Cut - Cowfee Art

Toga Himiko Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Toga Himiko from Boku no Hero Academia

Sticker measures approximately 3.5 x 6" tall & 3 x 2" mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Holo Kiss-Cut - Cowfee Art
Lewd Holo Kiss-Cut - Cowfee Art
Lewd Holo Kiss-Cut - Cowfee Art
Lewd Holo Kiss-Cut - Cowfee Art
Lewd Holo Kiss-Cut - Cowfee Art
Lewd Holo Kiss-Cut - Cowfee Art

Lewd Holo Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Holo from Spice & Wolf

Sticker measures approximately

6 x 3.5" (Standard)

4 x 4" (Portrait)

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Gudako Meme Sheet - Cowfee Art

Gudako Meme Sheet

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Gudako MEME from Fate/Grand Order

Sticker measures approximately 4 x 3.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Fate Grand Order Chibi Sheet - Cowfee Art

Fate Grand Order Chibi Sheet

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

4 Servants from FGO, of course, they’re fluffs! Sticker Sheet.

Sticker measures approximately 4.5 x 6" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Tamamo no Mae Kiss-Cut - Cowfee Art
Tamamo no Mae Kiss-Cut - Cowfee Art
Tamamo no Mae Kiss-Cut - Cowfee Art
Tamamo no Mae Kiss-Cut - Cowfee Art
Tamamo no Mae Kiss-Cut - Cowfee Art
Tamamo no Mae Kiss-Cut - Cowfee Art
Tamamo no Mae Kiss-Cut - Cowfee Art
Tamamo no Mae Kiss-Cut - Cowfee Art

Tamamo no Mae Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Tamamo no Mae from Fate Grand Order

Sticker measures approximately

5 x 6" tall (Casual)

4.5 x 6" (Peeker)

5.5 x 5.5" (Cat)

2 x 3" mini (Casual)

3 x 3" mini (Cat)

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art
Tamamo no Mae (Lancer) Kiss-Cut - Cowfee Art

Tamamo no Mae (Lancer) Kiss-Cut

Regular price $2.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Tamamo no Mae from Fate Grand Order

Sticker measures approximately

3.5 x 5.5" tall (Full)

5.5 x 4.75"(Bust)

3 x 2.5" (Mini Bust)

4.5 x 2.25 " (Mini Peeker)

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Nero Claudius Mini Kiss-Cut - Cowfee Art
Nero Claudius Mini Kiss-Cut - Cowfee Art
Nero Claudius Mini Kiss-Cut - Cowfee Art
Nero Claudius Mini Kiss-Cut - Cowfee Art
Nero Claudius Mini Kiss-Cut - Cowfee Art
Nero Claudius Mini Kiss-Cut - Cowfee Art

Nero Claudius Mini Kiss-Cut

Regular price $2.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Nero Claudius from Fate/Extra: Last Encore

Sticker measures approximately

2.25 x 2.25" (Bust)

3 x 2.5" (Peek)

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Miia Kiss-Cut - Cowfee Art

Miia Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Miia from Monster Musume

Sticker measures approximately

4 x 4" tall

2 x 2" Mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Serval Mini Kiss-Cut - Cowfee Art

Serval Mini Kiss-Cut

Regular price $2.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Sleepy Serval from Kemono Friends

Sticker measures approximately 5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art
Nekopara Kiss-Cut Set - Cowfee Art

Nekopara Kiss-Cut Set

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Cute NekoPara girls

Sticker measures approximately 5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art
Nekopara Peekers - Cowfee Art

Nekopara Peekers

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Cute Nekopara nekos and sister peekers

Sticker measures approximately 4" tall & 2" minis

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Nagatoro Kiss-Cut - Cowfee Art

Nagatoro Kiss-Cut

Regular price $2.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Nagatoro from Please Don't Bully Me, Nagatoro-san

Sticker measures approximately 4 x 4" tall & 2 x 2" mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Code:002 Kiss-Cut - Cowfee Art
Code:002 Kiss-Cut - Cowfee Art
Code:002 Kiss-Cut - Cowfee Art
Code:002 Kiss-Cut - Cowfee Art

Code:002 Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Zero Two/Code:002/Nine Lota from Darling in the Franxx

Sticker measures approximately 6 x 5" tall & 3.5 x 2" mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Yukari Akiyama Mini Kiss-Cut - Cowfee Art

Yukari Akiyama Mini Kiss-Cut

Regular price $2.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Yukari Akiyama from Girls und Panzer

Sticker measures approximately 2 x 2" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart