Original Artwork

Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)
Tiffy Kiss-Cut (Limited Edition Collab)

Tiffy Kiss-Cut (Limited Edition Collab)

Regular price $29.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Tiffy Collaboration, Artwork by @NottyTiffy and Cowfee

Sticker measures approximately 6.3" tall, 2.8" tall Peeker, 1.5"tall Mini Peeker

Due to high demand the next batch of (Backorder) will be delayed around 2 weeks.

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Koala Chan Kiss-Cut (Limited Edition)
Lewd Koala Chan Kiss-Cut (Limited Edition)
Lewd Koala Chan Kiss-Cut (Limited Edition)
Lewd Koala Chan Kiss-Cut (Limited Edition)
Lewd Koala Chan Kiss-Cut (Limited Edition)
Lewd Koala Chan Kiss-Cut (Limited Edition)
Lewd Koala Chan Kiss-Cut (Limited Edition)
Lewd Koala Chan Kiss-Cut (Limited Edition)

Lewd Koala Chan Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Koala chan by Cowfee

Sticker measures approximately 6 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Roo Chan Kiss-Cut (Limited Edition)
Lewd Roo Chan Kiss-Cut (Limited Edition)
Lewd Roo Chan Kiss-Cut (Limited Edition)
Lewd Roo Chan Kiss-Cut (Limited Edition)
Lewd Roo Chan Kiss-Cut (Limited Edition)
Lewd Roo Chan Kiss-Cut (Limited Edition)

Lewd Roo Chan Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Kangaroo chan by Cowfee

Sticker measures approximately 6 x 5" tall 
LIMITED RUN STANDARD PRINT

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Corona Chan SFW Kiss-Cut
Corona Chan SFW Kiss-Cut
Corona Chan SFW Kiss-Cut
Corona Chan SFW Kiss-Cut
Corona Chan SFW Kiss-Cut
Corona Chan SFW Kiss-Cut
Corona Chan SFW Kiss-Cut
Corona Chan SFW Kiss-Cut

Corona Chan SFW Kiss-Cut

Regular price $22.00 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Corona Chan original character by Cowfee

Sticker measures approximately 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Roo Chan Kiss-Cut (Limited Edition)
Roo Chan Kiss-Cut (Limited Edition)
Roo Chan Kiss-Cut (Limited Edition)
Roo Chan Kiss-Cut (Limited Edition)

Roo Chan Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Kangaroo chan by Cowfee

Sticker measures approximately 6 x 5" tall 
Reverse printed for interior application

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Tiffy Kiss-Cut (Limited Edition Backorder)
Lewd Tiffy Kiss-Cut (Limited Edition Backorder)
Lewd Tiffy Kiss-Cut (Limited Edition Backorder)
Lewd Tiffy Kiss-Cut (Limited Edition Backorder)

Lewd Tiffy Kiss-Cut (Limited Edition Backorder)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Tiffy @NottyTiffy, by Cowfee

Sticker measures approximately 3.5 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Koala Chan Kiss-Cut (Limited Edition)
Koala Chan Kiss-Cut (Limited Edition)
Koala Chan Kiss-Cut (Limited Edition)
Koala Chan Kiss-Cut (Limited Edition)

Koala Chan Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Koala chan by Cowfee

Sticker measures approximately 6 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Rias Kiss-Cut
Lewd Rias Kiss-Cut
Lewd Rias Kiss-Cut
Lewd Rias Kiss-Cut

Lewd Rias Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Rias Gremory from Highschool DxD

Sticker measures approximately 4 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Corona Chan Kiss-Cut
Lewd Corona Chan Kiss-Cut
Lewd Corona Chan Kiss-Cut
Lewd Corona Chan Kiss-Cut
Lewd Corona Chan Kiss-Cut
Lewd Corona Chan Kiss-Cut

Lewd Corona Chan Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Corona Chan original character by Cowfee

Sticker measures approximately 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu Back Kiss-Cut
Mayu Back Kiss-Cut
Mayu Back Kiss-Cut
Mayu Back Kiss-Cut
Mayu Back Kiss-Cut
Mayu Back Kiss-Cut

Mayu Back Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu and Mimi by Cowfee

Sticker measures approximately 2 x 5.5" tall, 4.5 x 5" & 2 x 2.5" tall (minis) 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu // Mimi Kiss-Cut
Mayu // Mimi Kiss-Cut
Mayu // Mimi Kiss-Cut
Mayu // Mimi Kiss-Cut
Mayu // Mimi Kiss-Cut
Mayu // Mimi Kiss-Cut
Mayu // Mimi Kiss-Cut
Mayu // Mimi Kiss-Cut

Mayu // Mimi Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu and Mimi by Cowfee

Sticker measures approximately 3.5 x 4.5" tall (Mayu),  4.5 x 4.5" tall (Mimi) & 2" tall (minis) 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Fox Slap II (Limited Edition)
Lewd Fox Slap II (Limited Edition)
Lewd Fox Slap II (Limited Edition)
Lewd Fox Slap II (Limited Edition)

Lewd Fox Slap II (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork, commissioned by @ShimakazeVR, by Cowfee

Sticker measures approximately 3.5 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Mimi Cat Butt
Lewd Mimi Cat Butt
Lewd Mimi Cat Butt
Lewd Mimi Cat Butt

Lewd Mimi Cat Butt

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mimi by Cowfee

Sticker measures approximately 6" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Fox Slap (Limited Edition)
Lewd Fox Slap (Limited Edition)
Lewd Fox Slap (Limited Edition)
Lewd Fox Slap (Limited Edition)

Lewd Fox Slap (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Moe, commissioned by Moe_OwO_, by Cowfee

Sticker measures approximately 3.5 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Tomoko Slap (Limited Edition)
Lewd Tomoko Slap (Limited Edition)
Lewd Tomoko Slap (Limited Edition)
Lewd Tomoko Slap (Limited Edition)

Lewd Tomoko Slap (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Tomoko, commissioned by Mikonopants, by Cowfee

Sticker measures approximately 3.5 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Big Bad Wolf Kiss-Cut (Limited Edition)
Lewd Big Bad Wolf Kiss-Cut (Limited Edition)
Lewd Big Bad Wolf Kiss-Cut (Limited Edition)
Lewd Big Bad Wolf Kiss-Cut (Limited Edition)

Lewd Big Bad Wolf Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Wolf Character Commissioned by ELH

Sticker measures approximately 6 x 5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Lewd Mayu Hips Kiss-Cut
Lewd Mayu Hips Kiss-Cut
Lewd Mayu Hips Kiss-Cut
Lewd Mayu Hips Kiss-Cut

Lewd Mayu Hips Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu by Cowfee

Sticker measures approximately 4.5 x 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mimi Kiss Cut
Mimi Kiss Cut
Mimi Kiss Cut
Mimi Kiss Cut
Mimi Kiss Cut
Mimi Kiss Cut

Mimi Kiss Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mimi by Cowfee

Sticker measures approximately 5.5" tall, 4.5" tall Peeker, 2" tall Mini Peeker

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu Back Kiss-Cut Ver II

Mayu Back Kiss-Cut Ver II

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu by Cowfee

Sticker measures approximately 3.5 x 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Big Bad Wolf Mini Kiss-Cut (Limited Edition)

Big Bad Wolf Mini Kiss-Cut (Limited Edition)

Regular price $2.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Wolf Character Commissioned by ELH

Sticker measures approximately 3 x 2" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu (wet) Kiss-Cut

Mayu (wet) Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu by Cowfee

Sticker measures approximately 4 x 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu Kiss-Cut (Limited Edition)

Mayu Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu By Cowfee

Sticker measures approximately 4 x 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu Hips Kiss-Cut

Mayu Hips Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu by Cowfee

Sticker measures approximately 4.5 x 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

 

Ships within 7 days

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart