Stickers

Holo Butt Regular Size Kiss-Cut (Preorder)
Holo Butt Regular Size Kiss-Cut (Preorder)
Holo Butt Regular Size Kiss-Cut (Preorder)
Holo Butt Regular Size Kiss-Cut (Preorder)
Holo Butt Regular Size Kiss-Cut (Preorder)
Holo Butt Regular Size Kiss-Cut (Preorder)
Holo Butt Regular Size Kiss-Cut (Preorder)
Holo Butt Regular Size Kiss-Cut (Preorder)

Holo Butt Regular Size Kiss-Cut (Preorder)

Regular price $19.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Holo from Spice and Wolf

Regular size versions of the sunroof design.

Reverse sticker applies from outside and will give the tinted look from the inside

Standard applies on the interior and will display full colour when viewed from the inside.

Please pick carefully

Sticker measures approximately 5" regular

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)
Holo Sunroof Kiss-Cut (Preorder)

Holo Sunroof Kiss-Cut (Preorder)

Regular price $79.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Holo from Spice and Wolf

Reverse sticker applies from outside and will give the tinted look from the inside

Standard applies on the interior and will display full colour when viewed from the inside.

Please pick carefully

Sticker measures approximately 12" tall, 5" regular

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Fox Butt Kiss-Cut
Fox Butt Kiss-Cut
Fox Butt Kiss-Cut
Fox Butt Kiss-Cut

Fox Butt Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

OC from @KohreanVR

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Akagi Kiss-Cut
Akagi Kiss-Cut
Akagi Kiss-Cut
Akagi Kiss-Cut
Akagi Kiss-Cut
Akagi Kiss-Cut

Akagi Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Akagi from Azur Lane

Sticker measures approximately 4.5" tall, half size mini

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art
Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder) - Cowfee Art

Sanyuu & Mayu Tentacle Collab Kiss-Cut (Limited Edition Preorder)

Regular price $29.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー & @majestyofcolor

Original Artwork Mayu by Cowfee, Sanyuu by Ninecolor

Sticker measures approximately 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu Piston Kiss-Cut (Preorder) - Cowfee Art

Mayu Piston Kiss-Cut (Preorder)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu by Cowfee

Sticker measures approximately 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Mayu Rear Kiss-Cut - Cowfee Art
Mayu Rear Kiss-Cut - Cowfee Art
Mayu Rear Kiss-Cut - Cowfee Art
Mayu Rear Kiss-Cut - Cowfee Art
Mayu Rear Kiss-Cut - Cowfee Art
Mayu Rear Kiss-Cut - Cowfee Art

Mayu Rear Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Original Artwork Mayu by Cowfee

Sticker measures approximately 5.5" tall 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
TaigerArts Mega Set Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Mega Set Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Mega Set Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Mega Set Kiss-Cut (Limited Edition) - Cowfee Art

TaigerArts Mega Set Kiss-Cut (Limited Edition)

Regular price $37.99 USD
/
Tax included. Shipping calculated at checkout.

Artwork By @TaigerArts

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
TaigerArts Palutena Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Palutena Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Palutena Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Palutena Kiss-Cut (Limited Edition) - Cowfee Art

TaigerArts Palutena Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By @TaigerArts

Palutena from Kid Icarus

Sticker measures approximately 6" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
TaigerArts Miruko Kiss-Cut (Limited Edition) - Cowfee Art

TaigerArts Miruko Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By @TaigerArts

Miruko from Boku no Hero Academia

Sticker measures approximately 6" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
TaigerArts Jalter Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Jalter Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Jalter Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Jalter Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Jalter Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Jalter Kiss-Cut (Limited Edition) - Cowfee Art

TaigerArts Jalter Kiss-Cut (Limited Edition)

Regular price $5.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By @TaigerArts

Jeanne d'Arc (Alter) from Fate 

Sticker measures approximately 7" tall, 6" tall peeker

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
TaigerArts Astolfo Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Astolfo Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Astolfo Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Astolfo Kiss-Cut (Limited Edition) - Cowfee Art

TaigerArts Astolfo Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By @TaigerArts

Astolfo from Fate 

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
TaigerArts Boosette Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Boosette Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Boosette Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Boosette Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Boosette Kiss-Cut (Limited Edition) - Cowfee Art
TaigerArts Boosette Kiss-Cut (Limited Edition) - Cowfee Art

TaigerArts Boosette Kiss-Cut (Limited Edition)

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By @TaigerArts

Boosette 

Sticker measures approximately 5.5" tall, 3" peeker

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Echidna Mega Set Kiss-Cut - Cowfee Art

Echidna Mega Set Kiss-Cut

Regular price $29.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Echidna from Re:Zero

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Felix Argyle Kiss-Cut - Cowfee Art
Felix Argyle Kiss-Cut - Cowfee Art
Felix Argyle Kiss-Cut - Cowfee Art
Felix Argyle Kiss-Cut - Cowfee Art
Felix Argyle Kiss-Cut - Cowfee Art
Felix Argyle Kiss-Cut - Cowfee Art
Felix Argyle Kiss-Cut - Cowfee Art
Felix Argyle Kiss-Cut - Cowfee Art

Felix Argyle Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Felix Argyle from Re:Zero

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Frederica Kiss-Cut - Cowfee Art
Frederica Kiss-Cut - Cowfee Art
Frederica Kiss-Cut - Cowfee Art
Frederica Kiss-Cut - Cowfee Art
Frederica Kiss-Cut - Cowfee Art
Frederica Kiss-Cut - Cowfee Art
Frederica Kiss-Cut - Cowfee Art
Frederica Kiss-Cut - Cowfee Art

Frederica Kiss-Cut

Regular price $19.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Frederica from Re:Zero

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Echidna Ver II Kiss-Cut - Cowfee Art
Echidna Ver II Kiss-Cut - Cowfee Art
Echidna Ver II Kiss-Cut - Cowfee Art
Echidna Ver II Kiss-Cut - Cowfee Art
Echidna Ver II Kiss-Cut - Cowfee Art
Echidna Ver II Kiss-Cut - Cowfee Art

Echidna Ver II Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Echidna from Re:Zero

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art
Echidna Kiss-Cut - Cowfee Art

Echidna Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Echidna from Re:Zero

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Hololive LIMITED Mega Set - Cowfee Art
Hololive LIMITED Mega Set - Cowfee Art
Hololive LIMITED Mega Set - Cowfee Art
Hololive LIMITED Mega Set - Cowfee Art
Hololive LIMITED Mega Set - Cowfee Art
Hololive LIMITED Mega Set - Cowfee Art

Hololive LIMITED Mega Set

Regular price $79.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Pekora, Coco, Korone and Okayu from Hololive

Sticker measures approximately 5.5" tall

SFW + NSFW + PEEKER Set Valued at $91.6

 

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art
Hololive Peeker Kiss-Cut - Cowfee Art

Hololive Peeker Kiss-Cut

Regular price $9.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Pekora, Coco, Korone and Okayu from Hololive

Sticker measures approximately 3" tall, Half Scale Mini Sheet

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art
Hololive NSFW Kiss-Cut - Cowfee Art

Hololive NSFW Kiss-Cut

Regular price $24.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Pekora, Coco, Korone and Okayu from Hololive

Sticker measures approximately 5.5" tall

5.5" Korone
6" Pekora
5.5" Okayu
6" Coco

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art
Hololive SFW Kiss-Cut - Cowfee Art

Hololive SFW Kiss-Cut

Regular price $29.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Pekora, Coco, Korone and Okayu from Hololive

Sticker measures approximately 5.5" tall

5.5" Korone
6" Pekora
5.5" Okayu
6" Coco

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Silica Kiss-Cut - Cowfee Art

Silica Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Silica from Sword Art Online

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart
Remy Kiss-Cut - Cowfee Art
Remy Kiss-Cut - Cowfee Art
Remy Kiss-Cut - Cowfee Art
Remy Kiss-Cut - Cowfee Art

Remy Kiss-Cut

Regular price $6.90 USD
/
Tax included. Shipping calculated at checkout.

Artwork By Cowfee//カウフィー

Sticker measures approximately 5.5" tall

Printed on high-quality outdoor use UV-resistant and weatherproof vinyl, satin laminate. 

All characters aged 18+

General Sticker application rules apply but here’s how you apply them properly!

Clean the surface!

The cleaner you get it the better it’ll stick and make sure it’s dry if you used something wet.

Rub it, cutely or lewdly.

Just make sure that it’s stuck to the clear side (for kiss cuts) so that you can apply it where you want. Peeling it back somewhat perpendicular seems to work the best.

Apply it!

Take your time and line it up perfectly and move from one side to the other. Generally go from top to bottom especially for larger ones.

Rub something hard over it.

Get a straight edge and run it over, starting from the middle, pushing out any potential air bubbles. The less air bubbles, the stronger the stick.

Remove the transfer tape!

It does take some force so just pull directly down or up, slowly.

And you're done! You can rub her over once more just in case.

Other things to consider

Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls.

Don’t put them anywhere normal stickers wont go, that is on surfaces which aren’t flat and smooth.

Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally.

Think of the stickers as decals rather than paper stickers that you’re familiar with!

The stickers are rated for outdoor use! 1-3 years under normal conditions for standard laminates.

What are ‘Kiss Cuts’, ‘Die Cuts’ and ‘Slaps’?

  • Kiss Cut comes on a rectangular sheet of backing paper with transfer tape over the cut out sticker (helps to line up when applying).
  • Die Cuts are the sticker in the shape of the design with the backing paper.
  • Slap is a just a rectangular design usually for car bumpers.

How long does it take for a preorder to ship?
A preorder will take around 2 weeks to be ship.

How long does shipping take?
Shipping will take anywhere between 1-3 weeks depending on where you are. These are coming from AUS so be wary of that, I’ve had various reports in different time frames to distance so that’s all I can say. We have had some rare instances of packages arriving 6 weeks later, if you have not received your package after 6 weeks, please contact us.

I didn’t receive my order!
Let me know if you didn’t receive it and I’ll see what I can do.

Will X design be re-released?
It depends, let me know though so I know there’s some interest in it.

ITASHA FAQ

Will you vector my image(s)?
No. We do not offer vectoring of images as a service. We aim to draw your Itasha at a high enough resolution for crisp prints. If you need it vectorised, there will be plenty of people who can help you with that.

Do you offer print/installation services?
No, we spend our time primarily drawing and designing for you to give you the highest quality art we can produce to meet your expectations. So print and installation will need to be done at a local shop in your area, look out for print, signage or car wrapping shops.

What is the process for getting an itasha design?
It varies from project-to-project, so please feel free to message us on social media (@cowfee_art) or send us an email (kaofimail@gmail.com)! We respond most quickly through Instagram. We’re always open for consultations and want to help you as best as we can.

When are your commissions open?
Commissions are open throughout the year but availibility is dependent on artist schedule. We put alot of time and effort into our artwork. Cowfee is a solo artist and will be doing them for you himself, so depending on spots available he will be able to get to your designs. Slots do tend to fill out quite fast, so make sure you get in before everyone else does!

How long does a commission take from start to finish?
This is dependent on the project and complexity (a single side vs. a full design, for example). Based on the complexity of the artwork it may take anywhere from 1 to 4 weeks, but this varies depending on what your Itasha dreams are. From idea to finalised art, we are here to assist your process but as much we'd like, our artist only has 24 hours in a day just like you and me.

 

Cart